ASUS Fonepad Note 6 ‏(ME560CG)

Disassembly Process

ASUS Fonepad Note 6 ‏(ME560CG) consists of various modules. This chapter describes the procedures for the complete ASUS ME560CG disassembly. In addition, in between procedures, the detailed disassembly procedure of individual modules will be provided for your service needs.

The disassembly procedure consists of the following steps:

  • Bottom Case
  • Mainboard
  • Battery Module
  • Sub board Module
  • LCD Module

 Bottom Case
The illustrations below show how to remove the bottom case from the EPAD ME560CG

1. Pry up the sides of the bottom case to loosen the cover and then remove the bottom case.

2. The following shows the bottom case.


Mainboard

The illustrations below show how to remove the mainboard from the EPAD ME560CG.

1. Disconnect the power FPC.

2. Disassemble the crew from the speakers.

3. Disassemble the crew from the MB.

4. Disconnect all FPC from MB.

5. The following picture is MB of ME560CG.


Battery Module

The illustrations below show how to remove the battery from the EPAD ME560CG.

1. Use pick to disassemble battery From 1 to 2.

2. Please replace a new battery once remove it.


Sub Board Module

The illustrations below show how to remove the sub board Module from the EPAD ME560CG.

1. Disassemble the crew from the sub board.

Disconnect the FPC and the rubber

3. The following is the sub board module.


LCD Module

The illustrations below show how to remove the LCD Module from the EPAD ME560CG.

1. The following is the LCD module.