ASUS Transformer Pad ‏(TF701T)

Disassembly Process

ASUS Transformer Pad ‏(TF701T) consists of various modules. This chapter describes the procedures for the complete ASUS Transformer Pad ‏(TF701T) disassembly. In addition, in between procedures, the detailed disassembly procedure of individual modules will be provided for your needs.

The disassembly procedure consists of the following steps:

DOCKING

  •  Cover Module
  •  Touchpad
  •  Battery Module
  •  SD Board
  •  Main Board

EPAD

  •  LCD Module
  •  Speaker
  •  Main Board Module
  •  IO Board
  •  Docking FPC
  •  Battery

Cover Module

The illustrations below show how to remove the Cover Module from the EPAD TF701T.

1. Push the Button to seperate the Pad from the Docking.

2. Remove 4 rubbers from the cover .

3. Remove 8 screws from the cover.

4. Pry 4 sides to loosen the cover.

5. Loosen the black latch to disconnect the TP FFC and K/B FFC and then remove the cover.


Touchpad

The illustrations below show how to remove the Touchpad from the EPAD TF701T.

1. Loosen the black latch to disconnect the TP FFC and take the TP FFC away.

2. Remove 4 screws and remove the iron cover.

3. Remove the TP Board.


Battery Module

The illustrations below show how to remove the Battery Module from the EPAD TF701T.

1. Push the button to turn off the battery.

2. Disconnect the battery cable and take the battery module away.


SD Board

The illustrations below show how to remove the SD Board on the EPAD TF701T.

1. Loosen the black latch to disconnect the SD Board FFC and take the FFC away.

3 . Tear off 1 tape.

4. Remove 1 screw  and take the SD Board away.


Main Board

The illustrations below show how to remove the main board on the EPAD TF701T.

1. Tear off 2 tapes, and disconnect the two hinge cables with the main board.

2. Tear off 1 tape and disconnect the docking FPC from the main board.

3. Remove 2 Screws and take the connector port away.

4. Remove 9 screws from the main board.


LCD Module

The illustrations below show how to remove the LCD module on the EPAD TF701T.

1. Remove 2 screws.

2. Pry 4 sides to loosen the LCD Module.

3. Loosen the white latches to disconnect the LCM FPC and Touch Panel FPC, then remove the cover.


Speaker

The illustrations below show how to remove the speaker on the EPAD TF701T.

1. Disconnect the speaker cable.

2. Pry up the speaker and remove it.


Main Board Module

The illustrations below show how to remove the main board Module on the EPAD TF701T.

1. Tear off 1 tape.

2. Loosen the white latches to disconnect the camera FPCs, and then remove the camera module.

3. Remove 4 screws.

4. Disconnect the PW_FPC and VOL_FPC ,and then remove Volume Key &Power Key.

5. Remove MIC rubber from the main board.

6. Remove 10 screws from main board.

7. Disconnect the FPCs and battery cable, and then take the main board away.


IO Board

The illustrations below show how to remove the IO Board on the EPAD TF701T.

1. Remove 4 screws from the IO Board.

2. Loosen the black latch to disconnect the IO FPC from the IO board.


Docking FPC

The illustrations below show how to remove the Docking FPC on the EPAD TF701T.

1. Remove 2 screws and then take the Docking FPC away.


Battery

The illustrations below show how to remove the Battery on the EPAD TF701T.

1. Tear off 1 tape.

2. Pry up the battery and remove it.