Hello everyone, today I will show you how to replace back glass on iPhone XS. This repair guide can be useful for those who want to change the broken back glass on the iPhone XS Max. To replace the back glass I recommend to completely disassemble iPhone XS. It is necessary for the removal of broken pieces glass and saves the plastic frame of the case. Also in the instructions included the process of assembling the smartphone.
To disassemble the iPhone XS you need the following tools:
- Screwdriver set with pentalobe 0.8 / tri-wing Y0.8 / philips 00
- Plastic mediator
- Suction cup for removing display
- Opening plastic tool
- Glue B-7000
To change the back glass on the case, it will not be enough just to pick up the broken glass and replace it with a new one. This is because the glass of the case goes under the frame of the camera and it will be necessary to remove the frame of the camera, which is welded by dott laser welding to the case of the iPhone XS. High temperature is very ruinous to the battery, so the battery must also be removed. All these disassembly steps are shown step by step in the video instructions.
What difficulties you may encounter in the repair process.
An ordinary hair dryer will not be enough to heat the cracked glass surface well for removing. You need a hair dryer that gives a temperature of 350 degrees Celsius.
Using high temperature, the glass can be remove, but this temperature is quite high, so I recommend using gloves, glasses for eye protection and a surface resistant to high temperatures, for example, a silicone pad for soldering.