Samsung GT-S5830i

Disassembly Process

Samsung Galaxy Ace GT-S5830i consists of various modules. This chapter describes the procedures for the complete unit disassembly. In addition, in between procedures, the detailed disassembly procedure of individual modules will be provided for your needs.


Unscrew the 7 points.(Be care of scratch and molding damage.)


Disassemble the REAR CASE like below picture. Lift the REAR CASE from below.(Be care of scratch and molding damage.)


1) Detach the 2 KEY FPCB.

2) Separate the LCD connector.

3) Lift the MIC FPCB. (1) Be care of scratch and molding damage. (2) Be care of damage to the FPCB.


Separate the LCD connector.(1) Be care of scratch and molding damage. (2) Be care of damage to the FPCB.


Separate the EARJACK connector and 6 CAMERA connector from PBA. (1) Be care of damage to the EARJACK Module. (2) Be care of damage to the CAMERA.


Disassemble the SUS and RCV from BRACKET (Be care of damage to RCV.)


Open the TSP connector then separate TSP from BRACKET (Be care of damage to the TSP FPCB.)


Remove LCD from BRACKET. 1) Be care of scratch and molding damage. 2) Be care of damage to the TSP & LCD