Samsung GT-S8600

Disassembly Process

Samsung GT-S8600 Wave 3 consists of various modules. This chapter describes the procedures for the complete unit disassembly. In addition, in between procedures, the detailed disassembly procedure of individual modules will be provided for your needs.

Disengage the Case body by pushing the Battery locker.

Carefully push the hole by tweezers.

Carefully release the screws at 6 different locations.

Separate the below deco.

Separate the Rear from the Set.

Release the screws at 1 locations.

Separate the volume key, power key FPCB from the Front.

Separate the SPK Ass’y, LCD, 3.5 phi E/J module connector.